Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: setting Greddy Profec B2 w/adjustable actuator(0-25psi)

+ Reply To Thread
Posts: 1-10 of 10
2010-03-31 21:23:07
#1
setting Greddy Profec B2 w/adjustable actuator(0-25psi)
I hooked up the Greddy E.B.C. and pretty much know how to set that up.
My question is at what psi should I set my actuator to?
My set-up is Det t28r w/hks adjustable actuator(0-25psi).
I wanna run Lo boost @ 8psi and Hi boost @18psi..thanks
2010-03-31 21:28:54
#2
didnt you just answer your own question?
2010-03-31 22:01:05
#3
Originally Posted by morgans432
didnt you just answer your own question?


. Very true.
2010-03-31 22:03:05
#4
you have to set the waste gate pressure at or below the low boost setting. I am setting mine for 8-10 psi with a 15psi low boost setting and a 24-26psi high setting.
2010-03-31 23:56:31
#5
Originally Posted by cortrim1
you have to set the waste gate pressure at or below the low boost setting. I am setting mine for 8-10 psi with a 15psi low boost setting and a 24-26psi high setting.


thanks cortrim1! ^thats what i ment^
LOL!the G.E.D didnt kick in the earlier question!
2010-04-01 00:01:35
#6
Originally Posted by klassickrican
thanks cortrim1! ^thats what i ment^
LOL!the G.E.D didnt kick in the earlier question!


it happens.
2010-04-01 00:09:02
#7
the three ports
Originally Posted by cortrim1
it happens.


I got another question..the profec valve unit(solenoid) has three ports Com,No & NC ports.
im using the COM & NO ports..what I do with the NC port? leave it open or cap it off?:o
2010-04-01 00:19:18
#8
Originally Posted by klassickrican
I got another question..the profec valve unit(solenoid) has three ports Com,No & NC ports.
im using the COM & NO ports..what I do with the NC port? leave it open or cap it off?:o


leave it open.
2010-04-01 01:46:34
#9
Originally Posted by cortrim1
leave it open.


OK! took it for a spin and it works great! thanks again!
2010-04-01 10:39:40
#10
ur Greddy Profec B2 is on psi or kpa?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top