Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Reliable "STI Killer" setups?

+ Reply To Thread
Posts: 201-210 of 231
2010-09-10 21:42:09
#201
I had a reliable STI killer with my GTiR T28 turbo and manifold @14psi in a stock avenir just with S4 cams
2011-02-22 01:34:27
#202
ight this is still on, did my build list...with estimated prices...just gonna go with.. a gtir t28/mani..520 or 550's, s4's...just looking for a clutch right now...any kits yall recommend
2011-02-22 01:58:20
#203
An STi.
2011-02-22 02:21:53
#204
det, 60 trim t3/t4, protec log and downpipe, 72 pound hr injectors, 300zx maf, jim wolf ecu.....got everything cheap second hand, and on 10 psi was right next to my friends full bolt on evo (evo 9 turbo, 23 psi, turbo back, 272 hks cams, upgraded frontmount, other stf i cant remember). and he SLAUGHTERS sti's. but, a stock de, s4 cams, and a t25 setup will do the trickjust fine too. i just like overkill.
2011-02-22 05:39:04
#205
ebay 6 puck ssprung clutches work more than fine for a t28...... my last ebay set up held just fine til just below 400whp
2011-02-22 12:06:25
#206
In my "stage 2" STi (turbo back exhaust + tune), I ran 12.7@107. I see most of you guys with basic turbo set ups doing that, no? Not that big of a deal... most STi's you'll find on the street will be stock or stage 2.
2011-02-22 19:58:54
#207
I like my competition stage 4 6 puck sprung so far. Kind of annoying for a daily, but you'll get used to it. Holds way better than my old solid disc used to.
2011-02-22 20:13:45
#208
Originally Posted by Big
In my "stage 2" STi (turbo back exhaust + tune), I ran 12.7@107. I see most of you guys with basic turbo set ups doing that, no? Not that big of a deal... most STi's you'll find on the street will be stock or stage 2.


Times eleventybazillion.

The few that you should even consider, would be the STi's with FMIC's, and even then it's a slim chance they've got any major work done.
Last edited by Cliff on 2011-02-22 at 20-27-35.
2011-02-22 20:16:13
#209
This is always my advice for a T28/S4 clutch combo: Clutch Kit Bundle, 2.0, Stage 4

Not cheap, but should be great for daily use where ceramic pucks and strong pressure plates fall short.
2011-02-22 20:38:06
#210
Originally Posted by BenFenner
This is always my advice for a T28/S4 clutch combo: Clutch Kit Bundle, 2.0, Stage 4

Not cheap, but should be great for daily use where ceramic pucks and strong pressure plates fall short.


Though I'm curious how good that metal disc is though. Might be a bit harsh on flywheel/PP.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top