Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Turbo Charts And Best Turbos For Your Needs

+ Reply To Thread
Posts: 31-40 of 144
2008-02-05 05:44:40
#31
I found this site years ago.
http://website.lineone.net/~jon_ed/Turbo_Table.htm

Lots of comparisons to make there!!!

Im running the gt2871r and am pretty damn happy with it.
2008-02-05 05:48:29
#32
So what is a safe pump gas boost level on a stock internals DET running a GTi-R t28 with a t04b compressor housing?
2008-02-05 18:35:21
#33
Originally Posted by paNX2K&SE-R
So what is a safe pump gas boost level on a stock internals DET running a GTi-R t28 with a t04b compressor housing?


15psi tune dependant

maybe 12psi so it does not hairdryer too much.
2008-02-05 19:27:15
#34
mmm me need a disco potatoe !!!

stratton.
2008-02-05 19:54:43
#35
I had a GT2871 , back when I was going to just turbo the stock de ., but I have always lwanted a Gt30r powered car , so I traded the new 2871r off and bought a GT3076R to run with an external wastegate on a det , with forged pistons , I hope it is everthing I hope it will be ....
2008-02-05 20:06:13
#36
Originally Posted by nissan
I had a GT2871 , back when I was going to just turbo the stock de ., but I have always lwanted a Gt30r powered car , so I traded the new 2871r off and bought a GT3076R to run with an external wastegate on a det , with forged pistons , I hope it is everthing I hope it will be ....


whats the config of the motor its going on?
2008-02-05 20:16:00
#37
How about:

U13 Sr20det
GT3071R
Calum ECU (750cc@3bar w/Z32 MAF)
Z32 MAF
750cc inj. w/Nismo FPR
Brian Crower Stg. 2
3" Downpipe
3" Exhaust
Ebay FMIC
2.5" IC piping
Greddy Type S Recirculated

^^ @ 10 PSI & @15 PSI ^^

Goal is 400whp, will it make it?
2008-02-05 20:21:33
#38
What do you think of the GT2876r Dre?
2008-02-05 20:23:20
#39
Originally Posted by SE-Rican
What do you think of the GT2876r Dre?



Garbage turbo.

It has a few problems.
2008-02-05 20:31:50
#40
Originally Posted by Andreas
Garbage turbo.

It has a few problems.




Do you think the T-2871r is ok for a built VE? Or would you think going with Gt3071R?

Lets say 400 whp is the goal on pump.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top