Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Easy Subaru STI / Aftermatket Injector Clip Wiring!

+ Reply To Thread
Posts: 1-8 of 8
2010-03-10 04:40:16
#1
Easy Subaru STI / Aftermatket Injector Clip Wiring!
I would have liked to have known about these when I did my STI injectors, but atleast this will be info for people in the future. I am pretty sure this website here can get the correct adapter to turn nissan injector clips into side feed sti clips or whatever injector you want to use.

Rather then buying some old clips with old wiring, and splicing them in you can just plug these in. I don't know what style clips our cars come with, but it should be easy enough to call them and find out. here is the link...

Fuel Injector Connectors - Bosch Electrical Connectors & Denso Connector Adapters

Hope this helps some people out!
2010-03-10 04:44:59
#2
you know you can just unpin your stock connectors and pin them into the subaru connectors right? lol. they clip right in without problems. They both use the same type of pins.

No splicing necessary. I posted up a thread about this a while back.
2010-03-10 04:53:54
#3
Originally Posted by ashtonsser
you know you can just unpin your stock connectors and pin them into the subaru connectors right? lol. they clip right in without problems. They both use the same type of pins.

No splicing necessary. I posted up a thread about this a while back.


Its still an easy solution for someone who doesn't want to mess with the wiring. Especially if you have to buy injector clips anyways why not just by the adapter kit? Different strokes for different folks
2010-03-10 04:57:19
#4
ah, i see, lol. i was more talking about if you got a set with clips. its really not hard to do at all. But hey again like you said makes it even easier.
2010-03-10 05:03:34
#5
Yeah, you did a write up on it in my thread Going to actually do this soon since I got thr correct clips now lol
2010-03-10 13:03:33
#6
Originally Posted by ashtonsser
you know you can just unpin your stock connectors and pin them into the subaru connectors right? lol. they clip right in without problems. They both use the same type of pins.

No splicing necessary. I posted up a thread about this a while back.


link?
2010-03-10 13:45:23
#7
look at likethemovies threads. Should be under something like subaru clips. He can help you out with it. i forgot i did it in his thread.
2010-03-10 23:22:28
#8
http://www.sr20-forum.com/general-sr20/23522-pulling-injector-wires-out-plugs.html
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top