Thread: Custom Radiator mount

Anyone done this?

On the NX, you know where the radiator normally sits.
I have my AC removed and an idea to move my radiator to where the condensor was, using a smaller core, and remoting a filler tank elsewhere.

From searching, I believe this should fit in that space....
Griffin Thermal Products 1-26242-X - Griffin Aluminum Pro Series Radiators - Overview - SummitRacing.com

anyone have their NX apart and confirm the measurements of the space where the condenser is?
Im having trouble finding a picture for a reference....

I know you can fit a decent sized core up front on a sentra when you remove the condenser. I used a cross flow dual pass core from Saldana racing. They can fabricate what ever size you need, just in case you can not find something already available. If I had to do it again, i would definitely incorporate a shroud for the fan.

thats nice, any more pics ^ ??

stratton.

Wow that setup looks bananas! I second Stratton. More pics please.

thanks...i have a ton of pics, completely unorganized of course . i should go through them and put something together then post it up.

More pics fo sho!

javier what distributor are u using?

It is a US SR20 low port distributor. There are two trigger disk diameters that are used on the USDM SR motors. IIRC, in the US, high ports are 54 mm and low ports are 50 mm. The Autronic trigger disk i have is a 50 mm so I had to use a low port dizzy.

I have my IC in that space. That rad in your link would require some modification of the sheet metal. I hammered and trimmed mine out to about 28in of width tops unless you want a shorter core. With out modification you have about 24x14

HTH

javierb14 slick intake mani design