Thread: axle carrier bracket

anyone making a bracket to use all three bolts on the det's

dont think so, but i know of some ppl just welding a piece on, i am using just 2, with locktight (red)

You will be fine just using two bolts but, if you are one of those people that want all 3 your can weld on a peice of round stock to the block cut to the appropriate length and then drill it out and tap it then you can use the 3rd bolt.

Mazworx is working something.

i dont like the welding situation, well see what maxworx is goin to offer

If we were to make a bracket, it would be for the Spec V QR intermediate shaft.

Not as hard as you would think.

Grinding down the bottom of the motor to avoid hitting the crossmember is a lot more difficult.

never did it with my avenir

Yes.