Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: axle carrier bracket

+ Reply To Thread
Posts: 1-9 of 9
2010-02-16 04:41:56
#1
axle carrier bracket
anyone making a bracket to use all three bolts on the det's
2010-02-16 04:54:09
#2
dont think so, but i know of some ppl just welding a piece on, i am using just 2, with locktight (red)
2010-02-16 16:08:46
#3
Originally Posted by SERpriz
anyone making a bracket to use all three bolts on the det's




You will be fine just using two bolts but, if you are one of those people that want all 3 your can weld on a peice of round stock to the block cut to the appropriate length and then drill it out and tap it then you can use the 3rd bolt.
2010-02-16 17:36:27
#4
Mazworx is working something.
2010-02-16 22:22:35
#5
i dont like the welding situation, well see what maxworx is goin to offer
2010-02-16 22:38:34
#6
If we were to make a bracket, it would be for the Spec V QR intermediate shaft.
2010-02-16 22:45:14
#7
Originally Posted by SERpriz
i dont like the welding situation, well see what maxworx is goin to offer


Not as hard as you would think.

Grinding down the bottom of the motor to avoid hitting the crossmember is a lot more difficult.
2010-02-16 23:12:30
#8
never did it with my avenir
2010-02-17 04:25:22
#9
Yes.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top