Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: whats a good wide band??

+ Reply To Thread
Posts: 31-39 of 39
2010-02-02 04:13:09
#31
Originally Posted by cortrim1
no its not ok. you will shorten the life of the sensor. you need to mount it further down stream of the turbo. here is a pic of my 02 housing and dp. you can see both o2 sensor bungs. the second one is for the wide band.




And is that exhaust set-up custom? i like it.
2010-02-02 12:36:50
#32
Originally Posted by b13kev
And is that exhaust set-up custom? i like it.


yes it goes along with my custom asp vet manifold.
2010-02-02 14:32:11
#33
Originally Posted by cortrim1
no its not ok. you will shorten the life of the sensor. you need to mount it further down stream of the turbo. here is a pic of my 02 housing and dp. you can see both o2 sensor bungs. the second one is for the wide band.



^I love that DP! Yeah, that's the perfect spot for the second bung.

Originally Posted by natethebrown
Here is a good article about widebands. It has a comparison of a number of them.

The Ultimate Wideband Air/Fuel Ratio Meter Test Part 1


^Great post Nate! Saved.
2010-02-02 15:10:50
#34
nate, that link should be a sticky in the tuning section. seriously.
2010-02-02 16:06:22
#35
Originally Posted by Joekuh
nate, that link should be a sticky in the tuning section. seriously.


x 2. I'll PM Cliff and Vadim.
2010-02-02 16:18:40
#36
I approved that link for a post creation yesterday. I need to see where it went.

As an aside, just got myself an LC-1 with DB RED gauge for $189.99 shipped!

Innovate Wideband DB RED Gauge Kit with LC-1 3796 - NEW : eBay Motors (item 150408900322 end time Feb-02-10 11:32:29 PST)

yeyah!
2010-02-02 21:30:37
#37
I have the AEM unit , and if you have the EMS you can send the signel to the EMS and data log it form there ...
2010-02-02 21:37:06
#38
I have been running the Zeitronix's wide band for a long time now. Switched from one car to the other and about to buy a 2nd unit. It's the only 02 sensor I run in the cars.
2010-02-02 21:43:43
#39
Originally Posted by nissan
I have the AEM unit , and if you have the EMS you can send the signel to the EMS and data log it form there ...


you can do the same thing with the lc-1. I have aem ems as well.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top