Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: I need help... a lot

+ Reply To Thread
Posts: 11-17 of 17
2010-01-28 03:41:16
#11
Originally Posted by b13kev
well then i know where to go for a replacment.


But anyways. the wire harness from my low port sr fell in place almost.
MIne from my Highport did also. But I knew where everything went already and had everything labeld just incase I forgot. But from what hes saying he had to buy another harness for some reason. Im trying to figure out why though. It wouldve been easier to just use the stock harness depending on teh car.
2010-01-28 03:42:32
#12
I bought a harness because my car came with a ga16
2010-01-28 03:44:15
#13
More info...whats the harness from...what year is your car?
2010-01-28 03:45:40
#14
The harness was SUPPOSED to be from a 96 200sx ser but they have a wire for a temp gauge lol

My car is a 95 200sx SE. I have a 96 ser ecu already reprogrammed by jwt
2010-02-08 05:15:15
#15


Ive apparently deleted microsoft paint, so bear with me... Im talking about the part that is across from the ecu plug. You can see the oil pressure sensor plug on the end of it. Where are those plugs going to?
2010-02-08 12:26:38
#16
Looks like a 98 SR harness.
2010-02-08 12:57:49
#17
One of those is the power steering pressure sensor plug I believe. There should be a plug on one of your power steering lines on the firewall. I'm not sure about the grey one.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top