Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: my shot clutch and flywheel

+ Reply To Thread
Posts: 21-22 of 22
2010-01-19 18:39:04
Originally Posted by macphee4
please explain to me how not using an alignment tool would do that?

Using an alignment tool during disc installation wouldn't have prevented failure. An alignment tool only aids the installer with being able to mount the transmission to the motor without as much fuss. Once the tranny is mounted securely to the motor, it doesn't matter if the disc was off a bit or not because it will seat itself on the input shaft.

Sure you already knew that though, hence the question you posed
2010-01-19 18:47:51
Originally Posted by coach
still a fan of the ACT XT Pp with a 6 puck sprung hub disk. I have never ran into issues with them.


x3 I have been runnning and ACT HD pp and 6 puck sprung for 3 yrs now making about 300tq and its rated to about 315tq I believe. No problems at all and I beat this **** out of the clutch. Still grabs like the day I got it.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top