Thread: need a flywheel

Seems in pulling my tranny off I found that my flywheel is gone, The springs on my clutch disk have rubbed against the flywheel and created a deep grove in the flywheel, I will post pics up later. So now Im in the market for a flywheel, anybody know if XTD prolites are any good? can I just go back to OEM and that hold 400who? I read this from johnny wangwang but just wanted other opions.

http://www.sr20-forum.com/general-sr20/3651-xtd-9lb-flywheel-review-6-puck-unsprung-clutch-review.html

You will probably end up getting the F1 racing flywheel if you buy the XTD on Ebay. I can confirm this myself and w/another guy on the forum who bought the XTD and ended up w/an F1 racing flywheel. Flywheel is about 13lbs. I like this, because it's not too light but shaves a few pounds off the stock one. Plus it's cheap!

http://cgi.ebay.com/ebaymotors/F1-RACING-CHROMOLY-FLYWHEEL-NISSAN-SENTRA-200SX-NX-G20_W0QQcmdZViewItemQQhashZitem5ad3145404QQitemZ390088381444QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Sweet thanks for the info, I was looking at this one..is this what you ordered first
XTD® PROLITE 12LBS FLYWHEEL SENTRA G20 NX 200SX SR20DE : eBay Motors (item 200422075829 end time Jan-26-10 08:31:04 PST)

yes. You will probably get an F1 racing flywheel if you buy the XTD. I e-mailed the seller and he gave me a $20 refund or so.

sweet I will order that one then, either way I think it should be a decent flywheel, oh what kinda power are you running with it?

if i were obd-1 i would def hop on this deal

My Flywheel is holding up fine and works very well for my setup. Not to light for my turbo and revs up as fast as I want it to! ALso I orderd the XTD flywheel and GOT an XTD FLywheel. It was advertised as 9lbs. But it was a scale Verified 10.5lbs.

Ya, I don't think they're making those anymore. Mine came w/an 'XTD' sticker but it was clearly an F1 racing flywheel.

I have a fidanza flywheel for sale! Talk to me!

Brent

Got pics? Did anyone weigh it on a digi scale to confirm its actually 13lbs?