Bucking issue at full throttle
Hi, maybe someone can help me out with a problem I am having.
My car has started "bucking" at full boost. If i go partial throttle and keep it in the 5-6psi range the thing pulls hard to redline. If I go full throttle (8psi) the car bucks as if it is cutting out as I am accelerating.
I recently moved from Hawaii to Virginia, the car has been sitting for almost two months while in transit and then over the holidays while I waited to get it registered. It definitely did not do this before I moved. Engine has about 30k on it since rebuild and has run with no problems. The battery did die in transit and has been working OK since I jumped it but it seems to only last a day or two before I need to jump it again. I am also still running a stock MAF and I know I am near the limit of that MAF. With the air being probably 40 degrees cooler is it possible I am getting too much oxygen for the MAF?
Any help would be appreciated, here is my setup:
stock B13 MAF
Toda cams and valve springs 264 duration w/ 10.5 mm lift
Ferrea stainless steel valves
crower titanium valve spring retainers
new nissan cam follwers
9.5:1 pistons
cometic metal head gasket with arp head studs
unorthodox racing crank and water pump pulleys
outlaw engineering thermal spacers
hotshot cold air intake
gt28rs turbo (brand new with approx. 1,000 miles on it now)
jgy turbo kit w/370cc injectors
jgy 2.5" mandrel bent exhaust with magnaflow mufler and resonator
msd 6A-L ignition with ss blaster coil
jwt computer (programmed for stock MAF, stock fp, 370cc injectors)
My car has started "bucking" at full boost. If i go partial throttle and keep it in the 5-6psi range the thing pulls hard to redline. If I go full throttle (8psi) the car bucks as if it is cutting out as I am accelerating.
I recently moved from Hawaii to Virginia, the car has been sitting for almost two months while in transit and then over the holidays while I waited to get it registered. It definitely did not do this before I moved. Engine has about 30k on it since rebuild and has run with no problems. The battery did die in transit and has been working OK since I jumped it but it seems to only last a day or two before I need to jump it again. I am also still running a stock MAF and I know I am near the limit of that MAF. With the air being probably 40 degrees cooler is it possible I am getting too much oxygen for the MAF?
Any help would be appreciated, here is my setup:
stock B13 MAF
Toda cams and valve springs 264 duration w/ 10.5 mm lift
Ferrea stainless steel valves
crower titanium valve spring retainers
new nissan cam follwers
9.5:1 pistons
cometic metal head gasket with arp head studs
unorthodox racing crank and water pump pulleys
outlaw engineering thermal spacers
hotshot cold air intake
gt28rs turbo (brand new with approx. 1,000 miles on it now)
jgy turbo kit w/370cc injectors
jgy 2.5" mandrel bent exhaust with magnaflow mufler and resonator
msd 6A-L ignition with ss blaster coil
jwt computer (programmed for stock MAF, stock fp, 370cc injectors)