Thread: Dual Walbro Set Ups?

a1000 intank

if ur going to use the 044 run a large power wire and run a 40 amp relay. seen to many cheap "hotwire" kits melt down. im talking 10ga power wire

Who knows the fuel line size INSIDE the gas tank of a B13?

5/16 or 3/8

I have a Bosch 044 that I mounted intank. I did a ton of research like I always do before I decided to go with this pump. Nothing hard to do at all except for getting cut up by the razor sharp lip of the gas tank. Here's what I did to mount mines in-tank.







You get the idea. If you need any help just pm me your contact info when you are ready to tackle this.

Jerry.

LoL so true it's sharp right around there and getting gas on it is so much fun too. Good job with the pump selection I can't stand those walmart pumps.

For the bosch 044 from atpturbo you need:
ATP-FTG-112
ATP-FUL-034 + -6an outlets

nice. I was wondering what this would look like. Yeah gas and open wounds my favorite. I cut myself too.

Thanks for the pic Jerry. I am going to order the pump here soon. I will PM you if I have any questions.

I ordered mine yesterday

another white b13 w/ an A1000 stock sumped tank, #10 an feeds the pump then #8 to the rail.

what control arms r those