Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: My turboed P11 won't rev past 2500 rpm

+ Reply To Thread
Posts: 11-13 of 13
2009-12-02 20:19:12
#11
The man with e-manage
2009-12-02 22:44:12
#12
You need to set it to 2 0 7. Then it will work.
2009-12-04 02:14:05
#13
Thanks for all your help. It works now after following your instructions. Do you by chance have any emanage ignition and fuel maps you can share?

Originally Posted by kevwal
You are suppose to set those switches to the settings the book tells you. You then go into the perimeter settings and change the A/F meter to NSHW2, change your injector sizes, choose your maps, check the throttle position voltage, click confirm, it will tell you to turn off the ignition then turn it back on. Go to communication and click export data to main unit. When it's done turn off the ignition again then back on and you should be good to go. That's if everything is wired correct.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top