Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Finally got my car back on the road..now boost problems update: new actuator

+ Reply To Thread
Posts: 31-34 of 34
2009-12-15 02:45:45
#31
Originally Posted by Andrew(nj)
ok update: i went to the dyno on saturday and borrowed my friends Manuel boost controller. on the dyno the car wouldn't go past 13psi no matter what adjustments i made. so that takes the b. controller out of the question. On the way home i decided to pull the act. wastegate line out to see if it would spike or hit more then 15psi. since i pulled the line the car would only boost 15.5 to 16.5 psi. so now i think i have to adjust the arm so it can close all the way.

BTw my car made 267hp at 240ish tq. my wideband says 10.8WOT @ 13psi i need to learn how to lean out my afc. /


Yea....adjust that arm. A little off topic but where did you go to dyno your car, just curious. I am assuming from your name that you live in Jersey correct?
2009-12-15 21:41:24
#32
Originally Posted by NJse-r
Yea....adjust that arm. A little off topic but where did you go to dyno your car, just curious. I am assuming from your name that you live in Jersey correct?


ya, i went to Krazy House Customs
3974 Route-1 North
Monmouth Junction, NJ 08852
(732) 951-9111
krazyhousecustoms.com

they had 3 dyno pulls for $50 special ..
2009-12-15 21:42:19
#33
that place is pretty cool I will be going there whenever my car is done
2009-12-16 13:37:39
#34
There should be some tension there. I put mine so tight that my low boost is 15psi
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top