Thread: B14 IC Pipe Routing.

wanted to ask if anybody here has and pics of how they routed their IC Piping from the HOT SIDE to FMIC. I also got A/C so the unit isn't really helping me wit the routing.

im running a w10 avenir btw.
just need to route my IC piping
and wait on the ECU from JWT so i can fire it up

also my turbo outlet pipe hits the center cross-member. any ideas on that besides re-clocking the turbo? i though about grinding part of the cross-member. anyone have any pictures of what they have done?

thanks,
Mark

Most people will have it under the radiator. I had it through the radiator for a while, but it gave me too much grief so I went under the radiator.

I have A/C and I ran mine from the top through where the water reservoir tank used to be. It's a tight fit but you can make it work. What Vadim seems to work well since he used that ATP turbo outlet adapter. I would do it Vadims way since it gives you so much room up top and less lag since you have less piping.

Did you move your tank or did you get rid of it? I need to keep the water reservoir so I guess I'll be going under the radiator.

I got rid of it.