Thread: Inj into rail question!

i got a pretty good deal on some RC720's from a buddy that parted out his built 4g64 project. im pretty damn sure theyll work on my gtir engine but i thought about using the stock rail with these but the part that goes into the rail is too big.

im trying to get advice whether i should maybe grind down the injector or drimmel the holes out in the rail.... or fork out the money for a jgy rail. anybody done this? i figured the injector has to fit in there pretty snug so it would be easy to mess up... maybe the rubber o ring would seal it.... if i grind the injector down im thinkin id probly have to get stock injector o rings to use cuz these are probly too big..

please let me know any info you can help me with.
appreciate it
matt

Why not make your own fuel rail. It's not that expensive and they will even sell you the drills to match your injectors.

Get a jgy and save some time ...unless you have the tools necessary to make your own.

ya i dont have or have access to what id need to make my own... guess ill just have to go with a jgy one. do i have to measure how wide the injector is and tell them? im a rookie when it comes to aftermarket fuel systems.. first time ive ever upgraded
matt

Why not talk to Pat over at Custom Steel?

i have the jgy fuel rail and recomend it, nice piece, but alot of people dont like to use their services but they have good products

ya i here jgy sucks on service and shipping ****.
matt

yea, but their products are nice i have both their 8.8lb flywheel, and their Fuel rail, no complaints from either....

save your self the time and get the fuel rail i mean if try to do it your self all the holes may be different and i'm sure that will piss you off when you have to keep doing s**t over.