Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Inj into rail question!

+ Reply To Thread
Posts: 1-9 of 9
2008-01-23 07:28:29
#1
Inj into rail question!
i got a pretty good deal on some RC720's from a buddy that parted out his built 4g64 project. im pretty damn sure theyll work on my gtir engine but i thought about using the stock rail with these but the part that goes into the rail is too big.

im trying to get advice whether i should maybe grind down the injector or drimmel the holes out in the rail.... or fork out the money for a jgy rail. anybody done this? i figured the injector has to fit in there pretty snug so it would be easy to mess up... maybe the rubber o ring would seal it.... if i grind the injector down im thinkin id probly have to get stock injector o rings to use cuz these are probly too big..

please let me know any info you can help me with.
appreciate it
matt
2008-01-23 15:50:14
#2
Why not make your own fuel rail. It's not that expensive and they will even sell you the drills to match your injectors.
2008-01-23 17:27:23
#3
Get a jgy and save some time ...unless you have the tools necessary to make your own.
2008-01-23 18:13:27
#4
ya i dont have or have access to what id need to make my own... guess ill just have to go with a jgy one. do i have to measure how wide the injector is and tell them? im a rookie when it comes to aftermarket fuel systems.. first time ive ever upgraded
matt
2008-01-25 23:28:14
#5
Why not talk to Pat over at Custom Steel?
2008-01-27 18:40:21
#6
Originally Posted by se-riousclassic
Get a jgy and save some time ...unless you have the tools necessary to make your own.


i have the jgy fuel rail and recomend it, nice piece, but alot of people dont like to use their services but they have good products
2008-01-27 18:55:56
#7
ya i here jgy sucks on service and shipping ****.
matt
2008-01-27 18:57:08
#8
yea, but their products are nice i have both their 8.8lb flywheel, and their Fuel rail, no complaints from either....
2008-01-29 15:19:06
#9
save your self the time and get the fuel rail i mean if try to do it your self all the holes may be different and i'm sure that will piss you off when you have to keep doing s**t over.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top