Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Any interest in divorced wastegate O2 housing/downpipe combos?

+ Reply To Thread
Posts: 371-380 of 739
2008-06-14 23:30:31
#371
looks pretty damn good!
2008-06-15 01:00:44
#372
looks nice man...
2008-06-15 01:03:39
#373
Fulking AWESOME!!!!!! yay!!!!!

Damian you're a beast...

keep me posted when the stainless prototype is almost done... want to make sure you got what I mentioned about the o2 bungs.

Peace!
2008-06-15 05:01:08
#374
Damian I over-revved my car coming back from STPR ([url]www.stpr.org[/url]) last w/e and threw a rocker. Its (barely) running on 3 cylinders and I can't bring it by until its fixed.
2008-06-15 05:06:57
#375
Yep looks nice. I'll take 2 o2 bungs on mine if possible, but I know that's a ways off. Any idea on full production?
2008-06-15 07:01:01
#376
Originally Posted by RC000E
Alright, I just have to get hold of Matt to get his car here. From there I'll just jig the dump pattern and be able to start making them. I ended up reducing the pieces to 3, and it simply didn't work...so 4 is where it's at.

The look may change slightly from one to the next, but all will follow the same concept. The radius just couldn't be done with standard mandrel bent tubing, so a little moto-x flavor had to be thrown in.

Once the dump gets jigged here this one will go out. The mild steel one is pictured. Basically I'm hoping to just get quicker making them once I have the basic concept down. I spent alot of time not thinking about this one, nearly as much as the next several that need made. I have a pretty good design approach from here despite not being able to jig each cut.

So, once I can be sure the dumps won't hit anything, these will go out. With Matt's car here the dp's will get made as well.

Spy pic with jig blurred....haha. You can see the 2"-2.5" transition, and how tight the bend was. In the end, I feel alright about it. Has that motox dynamax feel.




Since you said mild steal, I guess that means this one is mine? I can't wait to get this bad boy on and finish out the setup. This car is gonna move.
2008-06-15 15:52:47
#377
Originally Posted by paNX2K&SE-R
Damian I over-revved my car coming back from STPR ([url]www.stpr.org[/url]) last w/e and threw a rocker. Its (barely) running on 3 cylinders and I can't bring it by until its fixed.


Oh no.... I'm hoping for the best... it's good that it's running though, probably means there's only a couple max thrown and they might not of shattered. Let me know if you need a rocker
2008-06-16 04:10:29
#378
It looks like you have made some good progress. don't need mine for awhile but I could use it by the second or third week of July. Would you consider that a reasonable time frame? Thanks and let me know if you need any pics or whatever.

Will you have more room to work and optimize the trajectory for effiicent flow on the full DPs?
2008-06-22 01:06:18
#379
Matt, when will you be able to take him your car?
2008-06-23 00:40:56
#380
Well I'm hoping to get my car running in time for the flashlight drags next w/e. We're going to be spending July 4th w/e at a resort thats somewhat near Damians shop is so I might be able to drop it off then.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top