Damian I over-revved my car coming back from STPR ([url]www.stpr.org[/url]) last w/e and threw a rocker. Its (barely) running on 3 cylinders and I can't bring it by until its fixed.
0 Likes
Be the first to like this post.
03.5 G35 Sport 6MT 99 Miata 10AE GT2871R 07 Forester XT Sport 5MT
Originally Posted by RC000E Alright, I just have to get hold of Matt to get his car here. From there I'll just jig the dump pattern and be able to start making them. I ended up reducing the pieces to 3, and it simply didn't work...so 4 is where it's at.
The look may change slightly from one to the next, but all will follow the same concept. The radius just couldn't be done with standard mandrel bent tubing, so a little moto-x flavor had to be thrown in.
Once the dump gets jigged here this one will go out. The mild steel one is pictured. Basically I'm hoping to just get quicker making them once I have the basic concept down. I spent alot of time not thinking about this one, nearly as much as the next several that need made. I have a pretty good design approach from here despite not being able to jig each cut.
So, once I can be sure the dumps won't hit anything, these will go out. With Matt's car here the dp's will get made as well.
Spy pic with jig blurred....haha. You can see the 2"-2.5" transition, and how tight the bend was. In the end, I feel alright about it. Has that motox dynamax feel.
Since you said mild steal, I guess that means this one is mine? I can't wait to get this bad boy on and finish out the setup. This car is gonna move.
Originally Posted by paNX2K&SE-R Damian I over-revved my car coming back from STPR ([url]www.stpr.org[/url]) last w/e and threw a rocker. Its (barely) running on 3 cylinders and I can't bring it by until its fixed.
Oh no.... I'm hoping for the best... it's good that it's running though, probably means there's only a couple max thrown and they might not of shattered. Let me know if you need a rocker
It looks like you have made some good progress. don't need mine for awhile but I could use it by the second or third week of July. Would you consider that a reasonable time frame? Thanks and let me know if you need any pics or whatever.
Will you have more room to work and optimize the trajectory for effiicent flow on the full DPs?
0 Likes
Be the first to like this post.
1991 NX - Stalking Horse - mild bolt-ons
1993 Sentra - my freinds 4 door SE-R VVL USDM Tsuru Sunny Supersaloon conversion in progress
2011 Forester XT - DD
"Everybody's got a plan... and then I punch them in the mouth." Mike Tyson
Well I'm hoping to get my car running in time for the flashlight drags next w/e. We're going to be spending July 4th w/e at a resort thats somewhat near Damians shop is so I might be able to drop it off then.
0 Likes
Be the first to like this post.
03.5 G35 Sport 6MT 99 Miata 10AE GT2871R 07 Forester XT Sport 5MT