Originally Posted by swiss 
This is where the bracket was causing an issue on mine:
If you're able to bring it up and over, that might just work. You would need to route the dump it back toward the crossmember to clear the A/C lines up there, though. That could lead to some issues with intercooler piping, depending on people's setups.
I think there is room to shave some of the metal off the bracket to make it work like that in the picture.
Damian's idea should work as well by moving the a/c line some and route it up and over.
Be the first to like this post.
but i like my A/C...
this is my daily we're talking about here!!
Back to top
