Thread: Oil feed questions

Hi. I have a T25g and I understand the oil feed inlet is M11x1mm or 7/16-24 inverted flare. Can I use a normal 7/16-24 banjo bolt and adaptor such as:

http://www.summitracing.com/parts/EAR-977522ERL
and
http://www.summitracing.com/parts/EAR-997634ERL

? Also will I still need a restrictor if im running 3AN hose?
thx

http://www.sr20-forum.com/turbo/138-long-lost-t25-t28-parts-list-thread.html

Thanks for the link, I have read that thread but was after some definitive yes or no's.

I don't think that first fitting will work but the second one should.Summit should have what you need but it will be like $20. The 300zxs had T25s you can get that bolt at a nissan dealer or from Greg V prolly. And defiantly get a restrictor in there or at least make the bolt into one with some solder. It sucks blowing your seals, once they are blown they will still leak even after you get a restrictor in there