Originally Posted by
boostin50 
Here is a manifold we are building for my buddies NX2k. Check it out, if there is interest we my produce them!
You mention here you're possibly going to produce this manifold...
Originally Posted by
boostin50 We are fixing the EQL issue.....pics coming soon! No worries it will be EQL by the end of te day.....with all 4 runners measuring 18.4 in!!!!! We are still discussing pricing issues but we are also trying to gauge who might be interested in a mani like this one.....
Here again, you mention the possibility of selling a manifold similar to the one discussed in this thread...
Originally Posted by
sniper571 We are looking at a price range from around $700-750.....But we still have not completely decided on how much to charge. But it is a true equal length, I will have pics in the morning because I forgot the camera at the shop...We are mounting a tial 44 to it right now... Also it is currently flanged for a T3, but that is something obviously we can adjust and also whatever wastegate you would want could be done....
Here you're now talking about pricing for the EL manifold, further indicating that you're planning on reproducing/selling it.
Originally Posted by
sniper571 On mine no......for the production model, we will absolutely back purge. I know the importance of it, and we just did not do it for mine....So have no worries cause if we do decide to start producing we will.
Yet again, mentions of reproduction...
Originally Posted by
boostin50 We are thankful for all the constructive criticism that everyone is putting out there. Thanks for the interest! Now down to business. This manifold was build in like 2 hours, there was no design drawn up, it just came together. After we got it Mocked up we posted some pics for ppl to say what they want. There was a great deal of interest expressed in the manifold, and the fact that the 4th runner was 2" short. so i took it apart and made the manifold equal length. The manifold "IS" equal length. We are out to provide an affordable solution to other company's products!
Here you state that there has been a great deal of interest, which further substantiates the possibility of reproduction, as you've previously indicated. You're also still mentioning cost, via "affordable solution".
Originally Posted by
sniper571 We have this mani jigged up for reproduction, but we are most likely having a car with a/c and koyo rad ect come in and get one done also, his will be flanged for t25/28 and than also we will have it for t3 flanged turbos also and it will also still be EQL and set-up for external or if you have an internal gate no problem either....
So now this manifold is jigged up, priced, etc., and definitely sounds like it's in pre-production mode.
Originally Posted by
sniper571 No we are not trying to cop an attitude.... And selling the manifold??? We were seeing what kind of interest we might have. This mani was made for me alone, production would see something a little different if we ever did it at all!!!! This is my custom EQL mani, perfection was not the goal in a design we did in one afternoon... Your criticism is fine, I just don't care about it cause we are not selling this manifold
So now, with all of the above statements that have been made, you're likely not even going to produce the manifold? I'm sorry, but I'm a bit confused here, as I'm sure others are as well.
Please don't take offense to my multiple quote reply, I'm just trying to understand what's going on here. From all previous posts, it sure seems like you're planning on mass producing this manifold, and now in the last post by you, you're not going to produce this manifold?
Be the first to like this post.
Back to top