Originally Posted by
Mazworx 
***UPDATES ON 6SPD***
We designed an adapter plate similiar to our SRVG (RWD) for the QR Spec-V trans. So for the ones that don't want to wait for the P12 bellhousing, you will just have to pop of the QR housing and send it in. It may come cheaper too. But will post pics of the finished product once machined.
Also, we are making a clutch setup similiar to the DEs with the 215mm disc. But the splines will accomodate the larger shaft and the flywheel will be proper for the setup. This will be a better option for the all motor guys.
is this adapter plate and clutch setup still in the works? i'm trying to figure out if i'm better off buying the p12 bellhousing, or using the existing spec-v 6spd bell housing and using this adapter plate since it seems like a cheaper solution according to your post. it's already a tight fit with the p12 bellhousing, do you happen to know the fit with the adapter plate? also what's the proposed setup since the starter on the spec-v bellhousing is located on the opposite side? do we have to purchase a QR starter?
what's the ETA for the release of the complete set of mounts and brackets as well as the adapter plate and clutch setup?
Originally Posted by
Mazworx I'm not sure, but the Spec-V ones look quit bigger. Why don't you want to swap the outers too? If it's the bolt patter, you can just send use the hubs and we can remachine them for the right pattern.
any idea for pricing on the machine work?
thanks for all the vvl support guys, everything looks very promising!
Be the first to like this post.
Back to top
