Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Mazworx got some FWD Love :)

+ Reply To Thread
Posts: 341-350 of 407
2009-12-01 13:37:58
#341
is that a bc crank?
2009-12-01 14:45:39
#342
Originally Posted by BlueRB240
Is that crank going into your S15?


We will be testing a different size crank in the race motor next season
2009-12-01 14:45:59
#343
Originally Posted by turbotank
is that a bc crank?


Nope sure is not.
2009-12-01 14:46:31
#344
Originally Posted by Kleensleeper
Pricetag on one of these?



Going to start a group buy on them. Will post a link. Its gonna be a hell of a deal
2009-12-01 18:29:53
#345
which rods will go with these mark?
2009-12-02 00:50:19
#346
How will a 91 mm stroke affect revability?
2009-12-02 21:07:41
#347
mark if you set up a group buy on a complete nut to bolt kit.

even though i dont have a ve motor yet, i would highly consider this.

im looking foward to seeing what comes of this !!

stratton.
2009-12-02 21:22:44
#348
Me too.
2009-12-02 21:29:56
#349
Originally Posted by squabzter
How will a 91 mm stroke affect revability?


Simple, quick and dirty calculations gives me an average piston speed of 21.5 m/s for 86mm stroke at 7,500 rpm and 25.8 m/s for 86mm stroke at 9,000 rpm.

91mm stroke at 7,500 rpm gives average piston speed of 22.75 m/s and 27.3 m/s for 9,000 rpm.

If you're worried about piston speed there is your data. Instantaneous piston speeds are about 170% of the average piston speed. Speed of sound is 343 m/s for reference.

Additional reading: http://www.marinediesels.info/2_stroke_engine_parts/Other_info/piston_velocity.htm
2009-12-06 00:33:52
#350
Sorry to get off topic on the 91mm crank, but wondering if there are any updates about the 6sp swap?

Also, with the 6sp swap, I tried searching to see if it's been asked before, but couldn't find anything. Does anyone know if the Spec V axles and B14 axles are the same length, and if they have the same inner tripod? If yes to both, wouldn't you just be able to use the inner section of the Spec V axle that splines in the tranny, then mate the B14 axle at the inner tripod? If that would work, you wouldn't have to swap the hubs. I'm just not sure if it would work or not.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top