Thread: Possible Group Buy Intake Manis!!! Taking Orders!!!!

Well i got in contact with the guy in Taiwan that made my intake manifold thats customer service has been top notch and the product i ordered just came in yesterday. The manifold looks awesome and i can tell right off its gonna make some very good power.

Here is the thing, he can make the manifolds with any spec you want. Thats how the group by will go down as well. You will need to provide the specs and motor for your needs.

Motor
Intake runner length, If not his general lenght from what i measured on mine is 6" give or take
Plenum size if not a general one that he makes will be used.
Throttle body going to be used. A must!
Use of IAC or not.


Manis can be made for N/A use or Turbo, I believe he does have some specs for runner length and plenum design for n/a use that would best benifit your n/a setup.

Again he can and has made them for basicly all the SR20 motors. Doesnt matter. He owns a GTIR with a VE head swap that he course races with. He has alot of knowledge and again his customer service is top notch.

Ive contacted Crim just waiting for his Ok to go on with the buy. Payments will be sent to me. And it will run till probably the Beg of Novemeber to get all the orders together. Payment will be required up front and there is no minumum or limit to the buy. The manifolds will be made as they are ordered and then a shipment will be sent out with all the manifolds at the close of the group buy.

The price will be $385 shipped to your door.

Again The quality is very good, Not the best but its very good. There are some spots on mine that i will be cleaning up to smoothen out such as the junction of velocity stacks to the stock intake runners and the throttle body flange to smoothen out the transition into the plenum. Other than that the inside of the plenum is very very smooth flowing as well as the velocity stacks. Ill be taking some pics of mine before and after cleaning and porting. Also will have some dyno results from mine as well probably within the next two weeks.

So keep a look out for the Group buy, For the price you cannot beat it anywhere for a manifold of this quality and trust me it will flow.

I'm in. I will send payment whenever because i was going to order one regardless. So LMK when this goes through....

Good I've got till November to save up the money

Subscribed. PM sent.

gains on an n/a VE?

Hey Ashton, does it come with a drilled out AICV like the one you posted in the other thread?

And do we have to send in the lower runners??? or does he provide those ??

Interested in a N/A VE one esp for that price let me know when the GB is going to start

He provides the runners and all, he also puts the plate on for the IAC if you wish to use it. Again alot of people dont use the IAC at all and have no problems with just setting the throttle plate screw but again its up to you. You can set it up any way you want.

With a ve i can see it gaining some ponies if the design is good for n/a Thats why its best if you have a good runner length and plenum size i would go with that and he can make them to the specs.

I am going to check with some of the OG guys in CT and see what they think would make the best power for a VE as far as design goes and I will let you know what I want in a few days it will take me a bit longer to get payment tho I have been springing on a lot of things lately