Thread: Avenir Manifold w/ GT28RS

Use a git-r wastegate bracket which is whats on my turbo now and a straight w/g rod. It will work. or even the gti-r w/g also. the one from atp uses like a different angle or something where they connect.

Any links to where I can get the GTiR wastegate bracket?

I have an adjustable HKS wastegate actuator, that was used with my stock t25, would that work?

doesn't that SR20 bracket on ATP work?

yes it does.

yeah the gtir waste gate works but I could not find a new or used one to buy.

I thought that bracket on ATP made the wastegate actuator sit at the wrong angle?

That top picture up here ^^^ is the ATP bracket, you can see the rod doesnt reach the flapper.

I'm just going to get a GTIR wastegate and hopefully find a GTIR bracket... worst comes to worst, could I just buy an OEM one from Nissan?

you need the bracket the wastegate as long as it is straight will work.

In that post, someone suggested turning the turbo a little more to get the W/G to fit w/ the ATP bracket.

http://www.sr20-forum.com/249145-post30.html

but then:



So idk if the S15 turbo is designed/clocked the same way as the GT28RS?

Heh, see I have no idea what to get to make this turbo fit.....

I hear from people that the ATP bracket works, but then other people say NO it doesn't work.

I'm just going to buy a GTiR bracket and a straight waste gate, and if that doesn't work.... I guess I'm SOL

You may want to try a GTI-R manifold, wastegate and bracket for clearance.