Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Avenir Manifold w/ GT28RS

+ Reply To Thread
Posts: 41-50 of 65
2009-09-17 20:34:08
#41
Use a git-r wastegate bracket which is whats on my turbo now and a straight w/g rod. It will work. or even the gti-r w/g also. the one from atp uses like a different angle or something where they connect.
2009-09-17 20:54:37
#42
Any links to where I can get the GTiR wastegate bracket?

I have an adjustable HKS wastegate actuator, that was used with my stock t25, would that work?
2009-09-17 22:42:47
#43
Originally Posted by 92BoostedSER
Any links to where I can get the GTiR wastegate bracket?

I have an adjustable HKS wastegate actuator, that was used with my stock t25, would that work?


doesn't that SR20 bracket on ATP work?
2009-09-17 23:06:33
#44
Originally Posted by gomba
doesn't that SR20 bracket on ATP work?



yes it does.
2009-09-17 23:07:35
#45
Originally Posted by 92BoostedSER
Any links to where I can get the GTiR wastegate bracket?

I have an adjustable HKS wastegate actuator, that was used with my stock t25, would that work?


yeah the gtir waste gate works but I could not find a new or used one to buy.
2009-09-18 01:21:07
#46
I thought that bracket on ATP made the wastegate actuator sit at the wrong angle?

That top picture up here ^^^ is the ATP bracket, you can see the rod doesnt reach the flapper.

I'm just going to get a GTIR wastegate and hopefully find a GTIR bracket... worst comes to worst, could I just buy an OEM one from Nissan?
2009-09-18 03:26:02
#47
you need the bracket the wastegate as long as it is straight will work.
2009-09-18 13:06:09
#48
Originally Posted by 92BoostedSER
I thought that bracket on ATP made the wastegate actuator sit at the wrong angle?

That top picture up here ^^^ is the ATP bracket, you can see the rod doesnt reach the flapper.

I'm just going to get a GTIR wastegate and hopefully find a GTIR bracket... worst comes to worst, could I just buy an OEM one from Nissan?


In that post, someone suggested turning the turbo a little more to get the W/G to fit w/ the ATP bracket.

http://www.sr20-forum.com/249145-post30.html

but then:

Originally Posted by LikeTheMovies
yeah but now your compressor outlet is almost facing straight down, and runs right into the crossmember. I tried. that bracket failed for the s15 turbo.


So idk if the S15 turbo is designed/clocked the same way as the GT28RS?
2009-09-18 16:13:05
#49
Heh, see I have no idea what to get to make this turbo fit.....

I hear from people that the ATP bracket works, but then other people say NO it doesn't work.

I'm just going to buy a GTiR bracket and a straight waste gate, and if that doesn't work.... I guess I'm SOL
2009-09-18 16:38:36
#50
You may want to try a GTI-R manifold, wastegate and bracket for clearance.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top