Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: how much boost can i run on my set up

+ Reply To Thread
Posts: 1-6 of 6
2009-09-01 23:41:44
#1
how much boost can i run on my set up
Here's my setup:
sr20 de-t (stock motor high compression)
Gti-r t-28 turbo bb (stock actuator max about 12 lbs) and manifold (no waste gate)
525cc msd # 50 injectors
z32 maf (blow through)
stock high compression cams
wolf ecu tune to z32 maf & msd injectors
stock fuel regulator
manual boost controller
solid mounts
2009-09-01 23:47:14
#2
15psi depending on the quality of the gas.
2009-09-02 00:00:05
#3
so it's good 15 lbs with c16 on race day?
2009-09-02 00:09:01
#4
From my research you should be okay at 15-18 psi on 93 octane and can run a bit more on C16 before the turbo completely falls on its face (on your particular setup). You might be pushing the injectors to their limit though. Check the max power you can make with your injectors at 3 bar. I tried searching for the thread that has that info but came up short.
2009-09-02 01:05:45
#5
That T28 cant max those 50lbers out. If it were me...on the days that I really wanted to killem id run 18-19lbs. I did this on my T25 for over a year when I had it with no probs
2009-09-02 03:34:26
#6
i tryed 20 psi one t28 lasted a month. the next one lasted days. get a gt turbo ball bearings love big boost
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top