Thread: Need a custom manifold...

I am running a gt2871r on my P11. I need a top mount turbo for clearance issues affecting my front motor mount. I would like to keep my turbo so I need a top mount manifold flanged for a t28. Where is the best place I could buy one or have one made? Any help would be appreciated. Thankx

http://jgsturbo.com/index2.html

contact them to get a log manifold flanged for the T2

if it were me i would check local performance shops and see what they can do for you, thats your quistest bet

Pro-Tech.

X2 They make the very nice manis and will custom make it to what ever you want.

Matt

I have to add [url]WWW.LOVEFAB.com[/url]

lovefab rocks it out, but nissancrazy will have to swing by so Cody can jig it up on his car!

Brent

I have a Lovefab manifold which I'm happy with but it did arrive with some issue's that needed sorting first, It cost me an extra £200 to sort out the flanges which needed machining flat and I had to have it modified so I could get to one of the studs with a spanner, Also the stud holes where way to big and it could be moved around on the studs at last 1/2" up and down or side to side, Which made it difficult to line up properly.

I'm not saying don't buy one from Lovefab because Cody is a good guy, Just make sure you're happy with the spec and make sure it arrives in the condition you would like it to be in, ie it fits lol.

You could also use Protech which have a good rep, I have a couple of friends with their manifolds, And they are both very happy with their purchases.


Rob

Bigger stud holes on manifolds are sometimes used to account for heat expansion, just a thought.

wat about xs engineering or xs power?