Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Anyone use one of these?

+ Reply To Thread
Posts: 1-10 of 13
2009-06-24 13:54:10
#1
Anyone use one of these?
OIL FILTER SANDWICH ADAPTER INFINITI G20 91 92 93 94 95:eBay Motors (item 270401322755 end time Jul-01-09 17:47:50 PDT)

Anyone use one of these to get oil to your turbo?
2009-06-24 22:11:26
#2
Dave I have never seen one used on a SR20 but, I have seen them used a ton of times on Honda B series motors.
2009-06-25 01:49:33
#3
Originally Posted by SE-Rican
Dave I have never seen one used on a SR20 but, I have seen them used a ton of times on Honda B series motors.


They held up well?
2009-06-25 02:12:24
#4
Originally Posted by daveracer
They held up well?


Oh yeah.
2009-06-25 03:16:30
#5
Likewise. Never seen them on an SR motor, but see them all the time at my friend's shop on Honda motors. They work VERY well.
2009-06-25 03:27:50
#6
I used the Greddy plate on my GA originally for oil supply....

Edit...
I guess it is post filter if you look at the port..... It worked fine when I had it installed....
2009-06-25 13:09:15
#7
Originally Posted by Kariba
Can we get a few other and probably run some comparisons? If this can save me the trouble of drilling I'll be well on my way with my SR20DE+T project. So far we have: Greddy & GlowShift.


I think you are confused on what this is for. This is for the oil feed. You drill for the oil return which is still necessary even if you use this for a feed.
2009-06-26 08:29:09
#8
ummm... I didn't have to drill anything for my oil feed... I just don't have use of my stock oil pressure sensor due to my oil pressure guage taking it's place on the "t" fitting.

It seems like a really good idea though. Kinda makes me wish that I had noticed these before.
2009-06-26 12:22:42
#9
Originally Posted by LukaMcCloud
ummm... I didn't have to drill anything for my oil feed... I just don't have use of my stock oil pressure sensor due to my oil pressure guage taking it's place on the "t" fitting.

It seems like a really good idea though. Kinda makes me wish that I had noticed these before.


Reading > You. Wes JUST said that it's for your feed, and you still have to DRILL FOR RETURN. That of course only matters if you're running a DE/VE block, and not a DET or VET block. Then again, you wouldn't need this pancake adapter anyway...
2009-06-26 13:45:34
#10
The issue was the long stem on our oil filter housings. Most adapters don't work unless you cut that stem off (which I have done many times).

Brent
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top