Thread: Nissan Primera Dyno now sr16-cams...

vvl on @ 4200 **** id be happy @ 10 psi with this type of power.

When you get the VET cams is there any way you can have them checked out for specs on the exhaust cam. Particularly the duration of that cam high lobe?

Sure man I will measure them.

jp, i was going to ask you as i just assumed, are you running a titanium bg wheel, you mentioned earlier it wasn't et, but still assumed it was a ti wheel?

No man its the "normal" one... is from a oldddddddddddddddd truck motor ahahah
cheers.
Going to send you What I need regarding to the cams...
thanks Dean.

BW

What kind of time frame we looking at for these cams to show up? I wanna see how much power I am losing from running the smaller cams.

if i send them express its about 5-7 days i think, costs a bit more via express though.

even though its and oldddd comp wheel, it still looks better than most garrets, from the pic it still looks about 20% taller, fin placement looks good etc.

As soon you get the cams Dean .. send it over here.. I will pay the shipp just need to know how much.

yeah this wheels are pretty nice design actually this are 22mm larger than the garretts units and the 7 blade are very eficcient to about 30lbs... here its where the EET wheels start to get into the range of efficiency over the NON EET .
I have 2 other comp wheels one its a billet 63mm and the other its the 66mm ETT but first the cam test
Cheers.

yeah, i was expending the cams Friday, but should come today hopefully, so if all goes well i will send today. Thanks for the offer, but i dont expect you to pay shipping. I am happy to to send them.

also are all the new ett wheels titanium? i know some of them are due to aggressive compressor designs, but dont know if all of them are.

CAMS HAVE BEEN SENT!

sent the cams today, was pretty happy with postage, because express international couriers work in weight classes, ie; 3-5kg's, 5-7kg's etc it can work out a lot more expensive depending what end of the scale you are at, but the cams weighed in at 5.3kg's so they where right at the edge of the bracket, making them only $6 more to express.

i didn't even get to open them
just shipped them straight out. Found out they actually did arrive friday, but i must have been out, and the posty forgot to leave a "parcel to be collected" document

so any way expect to see them in 5-7 days