Thread: Manley H beams vs Eagle H beams.

interesting, im looking more towards eagle rods everyday

in Mexico for the SR20DE that was available on B13, B14 & B15 Rods are the same

stock Rod DE is about 630gr


I was working a lightened OEM DE rods and the final weight was 550gr


weight of the pistons + pin (22mm) + rings

B14, B13 LP and HP SR20DE = 485gr

B15 RR SR20DE = 435gr

SR16VE N1 = 454gr

Nice to have some more data... so the VE pistons should weight aprox 435grs plus 630 for the rods its 1.065 kgrs ..

does anyone have the cp or other forged piston weight???

thanks for sharing the info churpis.

IMO eagle rods are the best bang for the buck, there are many great rods out there, but for the money eagle hold up pretty well under the most demanding conditions

BC bang for buck I would think, eagle very close. I have run eagles in a couple motors and not sure how you tell if htey are good or not, but never had a failure. Though never had a stock piston fail on me either!

Brent