Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: W11 Into B13 NX

+ Reply To Thread
Posts: 1-9 of 9
2009-04-24 06:34:39
#1
W11 Into B13 NX
I tried to search for what needs to be changed out here but I suck at searching.

Anyone know what I need to swap out. I don't have the stock b13 Sr20 so I need to find this stuff.

I read in one post that I need to get the older style TPS with 3 wires instead of 6. Is there anything else?

I am having trouble with my alt., my UR pulley doesn't fit right on it and I'm wondering if that needs to be swapped out too.
2009-04-24 06:57:41
#2
Dist, tps, coolant sensors, probably need the idle valves I think thats it might be missing something.
2009-04-24 17:24:16
#3
Thanks.
2009-04-24 18:51:11
#4
dont the passenger side motor mount braket need to be change?? i know when i got my BB i had to change the braket because the 3 holes were to wide for our motor mount
2009-04-24 19:09:04
#5
^ yeah that to forgot lol
2009-06-13 10:01:47
#6
Hey guys I got a b13 3 wire tps but it doesn't seem like it will fit on there. Is there a specific one I need to get?

I got a b13 dist too but im not sure if that was right. lol.
2009-06-13 10:14:32
#7
If your TPS has wire haning out from it with a plug then you have to change it.

If your TPS is just a 2 plug unit it leave it alone and plug your harness to the top one.
2009-06-13 10:16:14
#8
Id it is a W11 for sure 100% then the TPS does not have to be removed and like I said your harness will plug into the top plug of the 2 plug TPS.

Just change the Head temp sensor and guage temp sensor.
2009-06-13 10:24:09
#9
Originally Posted by Andreas
If your TPS has wire haning out from it with a plug then you have to change it.

If your TPS is just a 2 plug unit it leave it alone and plug your harness to the top one.


The problem is the TPS on the motor is busted. So I need to replace it with something. This 3 wire b13 one wont work, it goes too deep.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top