Thread: W11 Into B13 NX

I tried to search for what needs to be changed out here but I suck at searching.

Anyone know what I need to swap out. I don't have the stock b13 Sr20 so I need to find this stuff.

I read in one post that I need to get the older style TPS with 3 wires instead of 6. Is there anything else?

I am having trouble with my alt., my UR pulley doesn't fit right on it and I'm wondering if that needs to be swapped out too.

Dist, tps, coolant sensors, probably need the idle valves I think thats it might be missing something.

Thanks.

dont the passenger side motor mount braket need to be change?? i know when i got my BB i had to change the braket because the 3 holes were to wide for our motor mount

^ yeah that to forgot lol

Hey guys I got a b13 3 wire tps but it doesn't seem like it will fit on there. Is there a specific one I need to get?

I got a b13 dist too but im not sure if that was right. lol.

If your TPS has wire haning out from it with a plug then you have to change it.

If your TPS is just a 2 plug unit it leave it alone and plug your harness to the top one.

Id it is a W11 for sure 100% then the TPS does not have to be removed and like I said your harness will plug into the top plug of the 2 plug TPS.

Just change the Head temp sensor and guage temp sensor.

The problem is the TPS on the motor is busted. So I need to replace it with something. This 3 wire b13 one wont work, it goes too deep.