Thread: Stock BOV Flange

I give up on the stock BOV. After reading more about it, it seems like it's just too much hassle for a BOV that might not even hold up once I start increasing the boost.

Greddy Type S flange it is!

Or you could get the stock BOV flange put on there, run the stocker until you need more boost and get a 1G DSM BOV for $35 or so off eBay and run 18 psi no problem. And modify it to hold more if you need.

You know, just an idea.

(I can't stand those Greddy BOVs!)

My biggest problem is finding someone reliable to weld the flanges on.

I don't mind them doing the turbo inlet pipes, but with things that are going to be under boost I want to make sure it will be done right and not leaking.

As for the reason for the Greddy type one, because I like the flange the most over the HKS and the Bosch ones.

The HKS and Bosch ones look like would leak/flyoff haha.

I will not be buying a Greddy branded one, just the SiliconIntakes.com version haha

Vadim, do you still want the DSM flange? If not, it's going in the garbage.

Nah, I wont bother with it, thanks for the offer though .

I would honestly sell it on ebay, it might go for $10 plus shipping