Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: turbo lag under 3000rpms

+ Reply To Thread
Posts: 1-10 of 26
2009-04-06 16:04:10
#1
turbo lag under 3000rpms
it´s normal that my car feels a little turbo lag under 3000rpms??? after that the car runs great, but if i`m runing in 2nd gear at 2500rpms and i press the pedal i dont feel a good responce until the tach reach 3000rpms.

i´m runing a t25 turbo, 370cc stock maf and a jwt ecu, 2.5 downpipe, the timing its set to 15 degree, ngk bkr7 plugs, i adjust the tps voltaje to 0.47 with tb closed and 4.1 tb open.

i´ll appreciate any advise
2009-04-06 16:08:11
#2
Sure your ignition timing is spot on? Could be a dead spot in the fuel/timing map. Mine would do that in any gear because it was running hella lean at part throttle before boost.
2009-04-06 16:14:10
#3
Originally Posted by TeKKiE
Sure your ignition timing is spot on? Could be a dead spot in the fuel/timing map. Mine would do that in any gear because it was running hella lean at part throttle before boost.


the timing was set a 15degree before i adjust the tps voltaje i´ll check ti again

thanks men
2009-04-06 16:56:03
#4
Try resetting your ECU, then start checking for vacuum leaks.
2009-04-06 22:57:40
#5
Originally Posted by Vadim
Try resetting your ECU, then start checking for vacuum leaks.


resetting the ecu done, and its the same, now i´ll check the vacuum lines cause i´m only getting 5psi.
2009-04-06 23:35:08
#6
Only 5PSI? That's a pretty descent leak, it should be going to 7psi on non-ball bearing turbo.
2009-04-07 00:02:15
#7
check for boost/vacuum leaks and report back when you find the problem, lol
2009-04-07 03:32:34
#8
i need to find that leak, its a big loss and there´s a 2002 mustang GT with some bolts who want to race against the barney-movil
2009-04-08 17:33:59
#9
Originally Posted by paulino_kamote
i need to find that leak, its a big loss and there´s a 2002 mustang GT with some bolts who want to race against the barney-movil


Definitely sounds like a boost leak. You can just make a leak tester, it's really easy. If you are only hitting 5psi, it's probably a fairly major leak and you will be running rich.
2009-04-08 22:42:51
#10
Ghetto way of checking intake leaks:

let it idle, start spraying brake kleen, or tb cleaner at any spot you suspect a leak, your idle will jump, some times you won't notice idle increase, but if you have a way to watch fuel trims they'll jump when you find the leak, I've seen people catch **** on fire doing this, so watch out
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top