Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: rear motor mount brkt modification pics

+ Reply To Thread
Posts: 21-30 of 32
2008-01-14 18:10:12
Any pics Andreas?
2008-01-14 18:16:58
that dogbone looks pretty sweet
2008-01-16 05:50:56
Originally Posted by Octave
Rebound? I wanted solid I figured that ment no rebound. If it deforms im going with steel. The mount only has 2 weeks worth of driving on it. I figured the prothane and solid rubber mounts were as good as you could get and not let too many vibrations carry through the cabin but it's not bothered me at all just going solid metal.

This is what happened when I wheel hopped. 17" wheels with 40 series side wall.

You Seriously need to invest is some RWD!
2008-01-18 22:14:21
2008-01-18 22:56:02
solid dog bone and urethane mounts with ES control arm bushings stiff rear springs and sways will be best for launching.

2008-01-21 14:58:43
one that i have made. similar to andreas's design.
2008-01-21 15:02:07
Now thats how a dog bone mount should be made. Just enough rubber/urathane to absorb the vibrations and have no movment because there is not enought rubber/urathane to allow movement.

This setup will fit any NA and turbo aplication.
2008-01-21 15:23:26
Lance, you plan on making more? I don't mind picking up a couple from you. PM me.
2008-01-21 15:36:39
I can make a few for you but you have to supply the rubber pc. This you can get from a stock front mount.

I know Lance basically did this for his turbo setup for his use. I was to have made him one but never got around to it so he made his own.
2008-01-21 15:49:10
Cool, can you check your PM Miko, I wanted to clarify on what we discussed last week via PM.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top