Thread: Lets See Your Compresor Outlet Pipes

Looking for ideas on what to do with the compressor outlet pipe on the faced down turbo as the out let for it is about 1.5'' and my ic piping is 2.5 what have you guys done about this in your b13s.

thanks

I have an atp flange with a silicone transition hose.

benito u dont happen to have any pics

I'm pretty sure you can loosen the bolts a bit and rotate that housing. If not just buy an upward facing outlet and you can do something like this

I'm sorry, but every time I see that manifold, this is what I think of:




Also, just so I stay on topic, here's what I used on the NX, its the Hotshot candy cane pipe:




Worked good on the nx because of the limited space.

Yeah very true it's not for looks. I put the heat shield back over it

buy a FMIC kit off ebay for a Pulsar Gti-R and you will get a great outlet pipe. Go check them out.

Brent

Its kind of tight in there but hopefully you get the idea;

edit* shutterfly.com sucks i usta host my pics on imagestation, but they got moved to ^ , were are you guys hosting your pics now ??

on my turbo nx, the set up is blow threw with a hks ssq vented to the atmosphere on the hot side.

stratton.

Thank you so much guys