Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: backfire after injector install

+ Reply To Thread
Posts: 21-23 of 23
2011-09-06 01:15:02
#21
To much fuel, or not getting burnt properly. My NA did it bad for a while. I have I/H/E and S4s. So, I side gapped, and indexed my plugs, and it made an instant difference. I'm running a stock bin in my nistune right now. So, my decel enrichment is stock. I just wasn't burning all the fuel. I was at .36, then the other day I went up to .40 and some popping came back. I'd check the gap on ur plugs. Run the biggest gap you can. Also look into indexing, and/or side gapping. Drivability and efficiency will increase. Vadim made a how to on this.
2011-09-06 02:17:47
#22
Thanks for your help. I'll give it a shot
2011-09-06 04:35:42
#23
JWT is known to run on the richer side anyway. They tune it safe, but with a wideband, and SAFCII you can fine tune it alot better.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top