Results:
last dyno: 207,1 whp / 225 tq
1st run pure S4 cams: 222,8 whp / 236 tq
2nd run tweeking fuel pressure: 229,1 whp / 250 tq
I used the exact same setup (in my sig) as my last dyno exept the cams (straight dropp-ins). So the S4 cams gained me 15 whp & 11 tq in the first place. Since I was running pig rich we started tweeking with the fuel pressure and ended up gaining about 22 whp / 25 tq.
Runs were done on the same dynojet, same boost level (10 psi) and the same engine set-up.
IMO: I think its a bit low for S4 cams from what I've read on this forum. Best gains are between 4000 rpm - 6500 rpm. Sounds more like S3 cams.
Your opinion please.