Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What clutch ???

+ Reply To Thread
Posts: 11-17 of 17
2008-12-27 04:24:10
#11
Originally Posted by Kleensleeper
Clutchmasters twin disk ftw.


are you running a twin disc setup? How much power should it hold? What type of pressure plate?
2008-12-27 04:51:36
#12
Originally Posted by Hybrid_DET
around 320-350 ft/lbs.


So you would basically have to upgrade to a puck designed clutch if over 350whp.
2008-12-27 07:38:49
#13
Originally Posted by Hybrid_DET
are you running a twin disc setup? How much power should it hold? What type of pressure plate?


My twin disc will hold 800ft-lbs....Pretty sure none of us will ever hit that, but should hold over 650whp....My twin is from SPEC though so not sure about the clutchmasters set-up.....
2008-12-27 18:10:51
#14
Originally Posted by gomba
So you would basically have to upgrade to a puck designed clutch if over 350whp.



Not really. The XT pressure plate is a good one. But its just the disc they use is a stock disc. So it wont hold. The XT pp is really aggressive so you could go with a copper faced full disc and probably be good. I on the other hand am just tired of swapping clutches out so once I do this swap im about to do im throwing something on that better hold cause im not swapping it again...
2008-12-27 18:45:50
#15
My FX500 Clutchmasters setup is good for over 500 ftq



Chris.
2008-12-27 21:53:23
#16
JWT
2009-01-01 07:10:36
#17
Red clutchnet sprung 6 puck with a red stage 3 red clutchnet pressure plate. Hold like a champ! Now I am not making 359whp just yet, but will be in a bout a month or so....
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top