Thread: GTIR Turbo Manifolds

This is the first time I have seen an offering of a GTIR turbo manifold for sale on EBAY. Not bad for a FWD turbo manifold.


eBay Motors: Pulsar GTiR RNN14 SR20DET Exhaust Manifold Header (item 290283992445 end time Dec-26-08 19:00:00 PST)










Below are pics of the S13-S15 RWD manifolds. You can see that the palcement of the turbo for the GTIR one is in the correct postition when looking at these pics.






The RWD flange sits between the 3 and 4 cylinders where the FWD one sits more between 2 and 3 closer to 3.

The only thing I need to see if the thickness of the metal is up to par.

whats those 2 extra bolt holes sitting further down on the manifold for???

Support brace. That is the RWD manifold

that gtir manifold is garbage, holes don't line up properly and it cracks- if someone could copy it with better welds that would be perfect

Have you bought one of these yet?

Dre one of the local OH boys purchsed one. I think he had to take it to get the holes bored out a bit. I am not sure if he ended up using it or not. I will try and find out.

getting the holes opened up a bit is nothing big. I have to do that with some of the SSAC headers every once in a while. I usually open the holes 1/32 in larger and they fit.

**** maybe we buy this thing send it over to SSAC have them make it with thicker wall tubing just incase the tubing is too thin.

I thought about trying one out but no external gate so its a no go for me.

complete garbage

it will crack, cast iron will do just fine.