Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Another pull-through vs blow through

+ Reply To Thread
Posts: 1-10 of 89
2008-11-30 05:22:15
#1
Another pull-through vs blow through
I will post up sheets as soon as I can, but we dynod a stock bluebird setup on a DE today. On 10psi the blow through was around 160whp, the pull through made more power on only 9psi. By how much??? You won't believe it when you see it.

Draw through makes more power then blow through on a DE maf with no tuning It is possible to tune it out with an safc apparently, but the maf voltage is inconsistent on the de maf running blow thru. This causes the computer to dump fuel and pull timing. IF you have a de maf, do not blow-thru without a supplemental tuning device.
2008-11-30 05:27:26
#2
pull through as in recirculated?
2008-11-30 05:48:45
#3
As in before the turbo.
2008-11-30 05:49:15
#4
Hurry up
2008-11-30 05:51:43
#5
The motor has issues if it only made 160whp on 10psi.
2008-11-30 06:31:24
#6
The turbo is bad 8O.

It was a simple swap, from one setup to the next. Blow off valve was stiff enough to not leak under boost. And this was on stock MAF. The numbers show what they show on this setup. Stock bluebird setup with calum ecu and fmic. Stock exhaust.
2008-11-30 06:47:37
#7
put the numbers already, im desperate can't wait any longer
2008-11-30 06:51:15
#8
yeah 160 you got issues hahah but I duno how much a stock exhaust will restrict it.
2008-11-30 06:55:18
#9
stock exhaust will restrict it alot
2008-11-30 07:13:38
#10
40whp though? I duno about that 20 maybe
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top