Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Nissan W10 & W11 SR20DET Avenir Facts

+ Reply To Thread
Posts: 21-30 of 94
2008-10-14 18:29:52
#21
Originally Posted by Vadim
I recently purchased that engine. Mine was luckily a W11. The only way you can tell is by turbo part number.

It seems like W11 are more friendly for 98-99 200sx/Sentra's.

Reason I say this is because of the sensors, including the TPS, the TPS is two sensor like the 98-99 one

Remember buying that engine will give you the bare minimum, I didn't have a BOV, compressor outlet, IACV, and a few other things. This is why it probably costs so little... check my build thread here to see what I had to get.


Hey,

Cool. you did get lucky! You could turn around and sell that engine for twice as much

$690 for a W11 is a good deal heh. Some of those parts you mentioned could be taken from the old engine or be easily replaced/upgraded.

-G
2008-10-14 18:37:43
#22
Originally Posted by gomba
Hey,

Cool. you did get lucky! You could turn around and sell that engine for twice as much

$690 for a W11 is a good deal heh. Some of those parts you mentioned could be taken from the old engine or be easily replaced/upgraded.

-G


Haha awesome

Well most of the parts I got off the forum, but still have a few here and there that need to catch up on haha
2008-10-21 18:19:51
#23
Im thinking about buying that 690$ motor,but there is an 850 that comes with more stuf,but im not sure wat it is.it looks like a avenir with the highport manifold and the turbo is clocked down like it had a sidemount not a top,but the vc is red like a bluebird. avenir with painted vc?or just a bluebird and maybe the soft pipe bo;lts up to the hard pipe on top of the motor?cant tell cuz intercooler is not included
2008-10-21 18:22:11
#24
If the turbo goes down it is probably an avenir
2008-10-21 18:36:29
#25
yea it points down and has a small piece of tubing still on it,but the tubing starts to go down then starts to turn up right before it was cut
2008-10-21 23:00:30
#26
so,how the hell do you order anything from those guys?ive been trying to order that motor but everytime it gets to the part that says choose shipping method,i cant proced because there are no methods to choose from,wats going on?i tried to call but only got a recording.this is very frustrating,im poed!!
2008-10-21 23:13:34
#27
Originally Posted by Power-Shift
so,how the hell do you order anything from those guys?ive been trying to order that motor but everytime it gets to the part that says choose shipping method,i cant proced because there are no methods to choose from,wats going on?i tried to call but only got a recording.this is very frustrating,im poed!!


Try their other site:

Home Page
2008-10-21 23:37:11
#28
THANK YOU!!!
i had no idea that they had 2 sites.that site worked out.de-t en route to my work
PSSSSSSHHHHHHTTT!!!!!!!!
2008-10-22 00:03:46
#29
Originally Posted by Power-Shift
THANK YOU!!!
i had no idea that they had 2 sites.that site worked out.de-t en route to my work
PSSSSSSHHHHHHTTT!!!!!!!!


well, thank Barack Obama, he's the one that told me about it. He drives a 200sx SE-R too!

-G
2008-10-22 03:03:10
#30
^^^lol^^^
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top