Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Air 2 Water Heat Exchangers

+ Reply To Thread
Posts: 1-10 of 44
2008-11-19 20:47:54
#1
Air 2 Water Heat Exchangers
Trying to decide on heat exchangers for my A2W setup. Anyone have any thoughts? Summit Racing seems to have a pretty large selection. I would like to keep it hidden as much as possible to keep the stealth factor as high as possible.

Anyone have thoughts on this particular model? B&M SuperCooler mounted with this Mounting Kit

Any thoughts are appreciated.
2008-11-19 23:46:03
#2
i like the pwr round ones. I think coach was running one for a while.

PWR Liquid to Air 6" x 6" (3" inlet/outlet)

Matt
2008-11-20 01:32:37
#3
Sorry I didn't clarify. I allready have the IC part of it. Just need to get a heat exchanger to get the temps back down in the water.
2008-11-20 04:23:36
#4
I think i was running the bmm-70266 which seemed to work well for me. I had around 5 gallons total in the system, i used a jazz 3 gal cell in the hatch, and a jabsco centuripuppy pump, and 3/4" lines for the whole system.

I hardwired the pump and had it on a mannual switch, which worked well. The only other thing i wanted to do was put in some type of switch that would turn on a fan if you werent on the gas, like when your stuck in traffic so you dont get quite as much heat soak.
2008-11-20 05:19:41
#5
check this out ..
Air to Water Radiator

I ordered one of these to maintain stealthness I have another thinner one I can bring donw and you can have next time I am down , it is like 1x6x20 somthing , I was just down last saturday running around down there shopping with the wife , later Eric

and I think this is pretty cool also
eBay Motors: RCI 1 GALLON ALUMINUM FUEL CELL 2010A *NEW* (item 360108737208 end time Nov-25-08 18:39:30 PST)
2008-11-20 06:58:13
#6
Why not just use alky injection? works just as good if not better. You just can't run out
2008-11-20 13:36:23
#7
Originally Posted by Coheed
Why not just use alky injection? works just as good if not better. You just can't run out


Making the car an alcoholic!
2008-11-20 15:47:03
#8
Something big. Damn big.
A W2A setup is only as efficient as the heat exchanger.
2008-11-20 23:17:47
#9
Let me back up. I think a couple people are confused here.

I just bought this:



Spearco core and a Jaz 1 gal tank.

Now I need to get the heat exchanger part and was looking for feedback. Sorry for any confusion.
2008-11-21 02:00:09
#10
If this is a street car... get a fairly large one. Larger one with enough pump capacity will pull the most heat out of the intercooler and give you the coldest charge without heat soaking. If it is more of a strip car just throw ice in it.

Something like the one nissan crazy would be appropriate.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top