Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Good Sidefeed Injectors

+ Reply To Thread
Posts: 1-10 of 20
2008-10-24 00:55:36
#1
Good Sidefeed Injectors
I don't really want to switch to top feed... So are there any bigger injectors out there that will be capable of 500whp at 4 bar?
2008-10-24 01:07:58
#2
720cc or 740cc should get u there,
plus a fully built motor, big turbo a Walbro pump and good tune

you could probly use the old skool JWT 4 bar program that runs on a Ford Cobra MAFS too , spray wouldnt hurt either.

Ford Dealer parts number = F1SZ-12B579-A

Ford Engineering number on side of MAF itself = F1SF-12B579-AA and
also on MAF = AFH70-02

i belive its off the 93-96 model Cobra
2008-10-24 03:28:56
#3
Look for some SARD injectors. SARD = Denso.
2008-10-24 08:45:16
#4
sard 850cc side feds
2008-10-24 17:09:28
#5
So the nismo 740cc inj would be good then?
2008-10-24 17:12:12
#6
If they are the same price just get the 850's. If it's cheaper then get the 740's.
2008-10-25 00:43:05
#7
850cc sards should be cheaper than 740cc nismo's

the nismos run a 4 pinicle while the 850ccs run 1

i would just get the 850cc's when aiming for that power
2008-10-25 01:03:15
#8
Is the 4 hole better than 1 hole? I'm running at 4 bar so 740cc is more than enough... Plus the Nismo's are red =] .
2008-10-25 01:47:06
#9
well they are red so you car may go faster

1 hole is fine imo, but 4 hole can give better atomization
2008-10-26 07:37:20
#10
My Sard 800cc (top feeds) are 4 hole. Never really looked closely at the 850cc side feeds before.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top