Thread: Good Sidefeed Injectors

I don't really want to switch to top feed... So are there any bigger injectors out there that will be capable of 500whp at 4 bar?

720cc or 740cc should get u there,
plus a fully built motor, big turbo a Walbro pump and good tune

you could probly use the old skool JWT 4 bar program that runs on a Ford Cobra MAFS too , spray wouldnt hurt either.

Ford Dealer parts number = F1SZ-12B579-A

Ford Engineering number on side of MAF itself = F1SF-12B579-AA and
also on MAF = AFH70-02

i belive its off the 93-96 model Cobra

Look for some SARD injectors. SARD = Denso.

sard 850cc side feds

So the nismo 740cc inj would be good then?

If they are the same price just get the 850's. If it's cheaper then get the 740's.

850cc sards should be cheaper than 740cc nismo's

the nismos run a 4 pinicle while the 850ccs run 1

i would just get the 850cc's when aiming for that power

Is the 4 hole better than 1 hole? I'm running at 4 bar so 740cc is more than enough... Plus the Nismo's are red =] .

well they are red so you car may go faster

1 hole is fine imo, but 4 hole can give better atomization

My Sard 800cc (top feeds) are 4 hole. Never really looked closely at the 850cc side feeds before.