Thread: Intake Manifold Hose Connections

EDIT: Alright the vacuum hoses have all been accounted for. Here is the Vacuum hose diagram:

Here is the diagram from JGY's website:






I will post the Coolant hose lines, because some seem to be out of place, from turbo etc.

the 2 at the bottom are for the air regulator, which seems you are missing.

Ah what the crap

Is that the same as the AICV?

No. Here's a pic: http://www.gspec.com/p-7325-air-regulator-20.aspx

Got one from my lowport, if only I knew where to put it...

I meant to say the IACV, Idle Air Control Valve. Looks like I should be able to use mine from my SE-L

The larger pipe under the FPR niple goes to the charcoal canister.


The pipe that you have listed ( to intake ) does not go to the intake on a turbo car. It goes to the niple under the BOV housing you have. On an NA car it goes to the intake. The idle control and Cold start valve pick up air from there.

The Fast idle or Cold Start Valve is the one in the G Spec pick. That goes to the 2 larger niples on the bottom of the plenum.

Thanks for the update Miko, I need to update the good old fist picture

EDIT first post updated.

you are my hero ive been looking for the piping layout for my motor since i bought it. and that was a year ago and 5 forums no one could help me.

And this is why I ask on the forums, because someone else will need it