Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Jet fitting issues...

+ Reply To Thread
Posts: 1-6 of 6
2010-04-03 00:51:31
Jet fitting issues...
Alright so when installing my direct port kit, my buddy accidentally broke the fitting that screws into the nozzle that holds the jet. I bought another jet from Jegs. It screws into the nozzle no problem but the jet will not fit into it.

I can't get a hold of anyone at Zex for a direct replacement. Would I be able to open up the hole a hair bit to squeeze in the jet? I don't think it should be harmful at all but figured i'd ask for some input from the juice heads. TIA!
2010-04-03 02:07:22
I don't think it would matter, just keep it as close to the size of the jet as possible.
2010-04-03 06:04:13
I'm going to give it a try tomorrow. Its seriously about a hairs-worth thickness that needs to be opened up. Its pretty much the one thing that held me back from picking on hondas tonight.
2010-04-03 06:49:02
you probably got an NOS fitting, zex jets are fatter sizes then nos jets
2010-04-03 16:13:17
Yeah thats exactly what I ended up getting. I figured they should be the same. I was wrong. I tried getting a fitting from Zex but no luck at all. Couldn't get a hold of anyone on the phone even after a half hour of waiting.
2010-04-04 00:23:16
just email zex through the contact us link on thier page and tell them you were short one in a kit you picked up from an Etailer. they will send you one out and you wont have to worry about the size issue
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top